Since the loading mixer truck, the gear beating of the mixer bucket loader generally occurs in the conflict project between the gearbox gears. Generally speaking, the gear beating will occur in the manual gearbox. Do you know why the gear beating of the manual mixer bucket occurs? Generally speaking, there will be synchronizer in the vehicle. Its function is to synchronize the high-speed gear with the gear that is about to enter the current gear.
咱们都知道在倒挡的状况下，发生打齿现象的次数反而会增加，这主要由于在搅拌斗中未装置同步器，因此在中止状态下，齿轮之间的差速器会随之变小，这样倒挡就会比较顺畅。
We all know that under the condition of reverse gear, the number of tooth beating will increase. This is mainly because the synchronizer is not installed in the mixing bucket. Therefore, under the suspension state, the differential between gears will become smaller, so the reverse gear will be more smooth.
自上料搅拌车搅拌斗装载机出现打齿问题除了螺旋伞齿、啮合副自身质量、调整间隙不妥外，不正确的操作过程是导致拌和斗出现打齿问题的主要原因。
In addition to the improper quality of spiral bevel gear, meshing pair and adjustment clearance, the incorrect operation process is the main reason for the toothing problem of mixing bucket.
自上料搅拌车 搅拌斗装载机在正常状况下，自上料搅拌车一般一台，作业时前后桥一起驱动。若出现*载、后桥离地等现象，其悉数负荷由前桥接受，前桥的主减速器很简单出现损坏现象。
Under normal conditions, how much is a self loading mixer? The front and rear axles are driven together during operation. In case of * load, rear axle off the ground and other phenomena, all the load is accepted by the front axle, and the main reducer of the front axle is very simple to be damaged.
假如门架倾翻切入角过大，门架放置的过低，很简单发生前桥离地问题，悉数负荷由后桥接受，这时简单发生后桥主减速器损坏。而主减速器损坏八成由于断齿而发生了异响状况。
If the entry angle of gantry tipping is too large and the gantry is placed too low, the problem of front axle off the ground simply occurs, and all the load is accepted by the rear axle. At this time, the main reducer of the rear axle is simply damaged. The main reducer is damaged, and 80% of them have abnormal noise due to broken teeth.
自上料搅拌车搅拌斗装载机不仅是叉车用利用的设备，一起拌和斗装载机还能够出现一车多用途的现象。比如在插齿上装置拌和斗，搅拌斗不使用了再将搅拌斗从插齿上抽出来作为装载机进行使用。快捷不说了，一起还省事、省时、省力且牢靠。若客户自己家中有装载机只购买搅拌斗也是能够的。
The mixer bucket loader of self loading mixer truck is not only the equipment used by forklift, but also can be used for multiple purposes. For example, a mixing bucket is installed on the gear shaper. When the mixing bucket is not used, the mixing bucket is extracted from the gear shaper and used as a loader. Not to mention fast, it is also easy, time-saving, labor-saving and reliable together. If the customer has a loader at home, it is also possible to buy only a mixing bucket.
