The factory inspection is the basic guarantee of whether the concrete mixer truck meets the national standards and completes its work tasks. It is also a reliable guarantee for the operation and maintenance of the concrete mixer truck and the personnel around the construction.
1、检查
1. Inspection
车体的规格需要符合的要求，规格主要参数要符合公示。车身是否堆放杂物，检查柴油、机油、各种齿轮油、各种助力油、发动机冷却液和制动液，的液位和渗漏情况。
First of all, the specifications of the car body shall meet the requirements of China, and the main parameters of the specifications shall comply with the public notice. Whether the vehicle body is stacked with sundries, focus on checking the liquid level and leakage of diesel, engine oil, various gear oil, various booster oil, engine coolant and brake fluid.
2、车体
2. Car body
对于外购件需要有生产厂的出厂合格证，而且要符合相关的标准要求，需要经过混凝土搅拌车生产商的检查，达标后才能使用。对于所有露出的金属，表面需做防锈，符合相关的要求。
For the purchased parts, the factory certificate of the manufacturer shall be provided, and the relevant standard requirements shall be met. The inspection of the concrete mixer manufacturer shall be carried out before use. For all exposed metal, the surface shall be antirust to meet relevant requirements.
3、构件
3. Components
搅拌车的各构件安裝坚固，各接入部分不能有受损、形变等现象。总质量的情况下，在坡道上行车不能有混泥土外流现象。车子的排污还要符合的标准。
The components of the mixer truck shall be installed firmly, and the access parts shall not be damaged or deformed. Under the condition of total mass, there should be no concrete outflow when driving on the ramp. The emission of vehicles should also meet Chinese standards.
4、密封
4. Sealing
车体的每一项密封性性能良好，各个突面、管接头及所有的接入部位均不可有渗水现象。一俩达标的混凝土搅拌车需符合以上这些标准，
Each sealing performance of the car body is good, and no water seepage is allowed on each protruding surface, pipe joint and all connecting parts. One or two qualified concrete mixers must meet these standards,
