The market defects of the unified mixer truck are mainly reflected in the difference of the environment. The road conditions of the construction site and other places where the concrete mixer truck goes in and out are complex. Affected by the construction, the road is generally narrow and the road environment is not good. The average bicycle is OK. The semi-trailer is more difficult to drive and has a larger turning radius. It is not suitable for entering and leaving the construction site. Especially at the construction site, if it rains and the road is muddy, the semi-trailer is more likely to slip and sink.
2.6方自动上料搅拌车的出现，了这些建筑施工难题。自动上料搅拌车是由山东鲁樽机械自主研发的一款多功能混凝土上料搅拌一体车。
The emergence of 2.6 party automatic loading mixer has solved these building construction problems. Automatic loading mixer is a multifunctional concrete loading mixer independently developed by Shandong Lutun machinery.
2.6方自动上料搅拌车在使用之前为了确保正常的运行过程，需要对设备提前做一定检查工作的。那么接下来就让我们一起了解一下当设备在运行之前有哪些问题是需要我们检查了解的。
2.6 in order to ensure the normal operation process of our automatic feeding mixer, we need to check the equipment in advance. Next, let's find out what problems we need to check before the equipment runs.
1、蓄电池的保养检查：检查蓄电池固定是否牢固。
1. Maintenance and inspection of battery: check whether the battery is fixed firmly.
2、轮胎的检查：每月应在常温下检查一下轮胎气压。
2. Tire inspection: check the tire pressure at normal temperature every month.
3、离合器的检查：离合器液面处于高、低液面间是代表正常的，要是低于标准线，可能是总泵或分泵的皮碗有问题。
3. Inspection of clutch: if the clutch liquid level is between high and low, it means normal. If it is lower than the standard line, there may be a problem with the leather cup of the master cylinder or slave cylinder.
4、制动液面的检查：制动液在高、低位之间则表示正常。
4. Inspection of brake fluid level: if the brake fluid is between high and low, it indicates that it is normal.
5、发动机冷却液液面检查：发动机在政策状态时，一定不要打开散热器，可能会被溅出的冷却液或高温蒸气烫伤。等发动机冷却后，检查冷却液的液面是在什么位置，看是否需要加蒸馏水或纯净水或冷冻液，加水后的高度不能超过满位。发现短时间内冷却液减少的很快，应检查冷却设备是否有泄漏或直接到维修站去看。
5. Engine coolant level inspection: when the engine is in the policy state, do not open the radiator, which may be scalded by splashed coolant or high-temperature steam. After the engine cools down, check the position of the coolant level to see if distilled water or purified water or refrigerant needs to be added. The height after adding water shall not exceed the full position. If it is found that the coolant decreases rapidly in a short time, check the cooling equipment for leakage or go directly to the maintenance station.
2.6方料搅拌机操作环境通常都不是很好，这也导致需要我们对设备在操作之前有详细的了解才行。在确保设备不存在有任何故障问题之后才能够操作使用设备正常运行，避免在操作中可能存在的各种不良问题。
2.6 the operating environment of the square material mixer is usually not very good, which also requires us to have a detailed understanding of the equipment before operation. The equipment can be operated and used only after it is ensured that there is no fault problem, so as to avoid various adverse problems that may exist in operation.
