随着近几年的技术成熟，小型混凝土搅拌车为了生产混凝土的新兴机械设备，在日益严格的今天，搅拌车效率高、更便利、省钱又赚钱，一系列的亮点深得工程老板们的心，那么在使用时要注意什么呢？
With the maturity of technology in recent years, in order to produce new mechanical equipment for concrete, small concrete mixer truck is becoming more and more strict in environmental protection. Today, mixer truck has high efficiency, more convenience, saving money and making money. A series of highlights have won the hearts of Engineering bosses. What should we pay attention to when using it?
上料时，沙子、石子会与上料铲斗存在摩擦，底部及内部形成划痕，另外需要注意的就是车身上螺丝部位会变松。
When loading, sand and stones will rub with the loading bucket, and scratches will be formed at the bottom and inside. In addition, it should be noted that the screws on the vehicle body will become loose.
搅拌车工作的场所大多是崎岖不平的土路、布满石子的山路、时不时的上坡路，频繁的震荡抖动下，连接零部件间的螺丝会变松，影响搅拌车的工作效率，造成一定不良影响，因此，工人们要时常检查并拧紧松弛的螺丝，避免危害的形成。
Most of the workplaces of the mixer truck are rugged dirt roads, mountain roads full of stones and uphill roads from time to time. Under frequent vibration and shaking, the screws between connecting parts will become loose, affecting the working efficiency of the mixer truck and causing certain adverse effects. Therefore, workers should often check and tighten the loose screws to avoid the formation of harm.
此外，搅拌车的空气滤芯及柴油滤芯也需要时常检查，一旦空气滤芯及柴油滤芯阻塞，将会造成发动机功率的下降及内部零件的磨损，时常更换保养将避免此类问题的产生，刹车片、减震器、燃油泵在使用一定时间之后也需要更换、检修及清洗，保证施工顺利进行。
In addition, the air filter element and diesel filter element of the mixer also need to be checked from time to time. Once the air filter element and diesel filter element are blocked, the engine power will be reduced and the internal parts will be worn. Frequent replacement and maintenance will avoid such problems. The brake pads, shock absorbers and fuel pumps also need to be replaced, overhauled and cleaned after using for a certain time to ensure the smooth progress of construction.
其实，搅拌车的弱点除了铲斗的摩擦划痕外，其余部件经常进行检修即可保证正常的运作，当然，选择严谨的小型混凝土搅拌车生产厂家也是非常重要的。
In fact, in addition to the friction scratch of the bucket, the other parts of the mixer can be repaired frequently to ensure normal operation. Of course, it is also very important to select a rigorous and professional manufacturer of small concrete mixer.
此外操作小型混凝土搅拌车注意装料前，应先排净拌筒内残存的积水和杂物。在运输过程中要不停的转动，以防混凝土离析。混凝土搅拌运输车到达工地和卸料之前，应先使拌筒全速以14—18转/分转动1—2分钟，然后再进行反转卸料。反转之前，应使搅拌筒停稳，然后再开启反转。
In addition, when operating the small concrete mixer, pay attention to drain the residual ponding and sundries in the mixing drum before loading. Keep rotating during transportation to prevent concrete segregation. Before the concrete mixer truck arrives at the construction site and unloading, first rotate the mixing drum at full speed at 14-18 rpm for 1-2 minutes, and then reverse unloading. Before reversing, the mixing drum shall be stopped stably, and then the reversing shall be started.
工作时，不得将手伸入小型混凝土搅拌车的搅拌筒内，严禁将手伸入主卸料溜槽和加长卸料溜槽的连接部位搅拌，以免发生事故。更多相关内容就来网站www.zkzdsljbc.com进行咨询吧！
When working, do not put your hand into the mixing drum of the small concrete mixer, and do not put your hand into the connecting part of the main discharge chute and the extended discharge chute for mixing, so as to avoid accidents. For more information, please visit www.zkzdsljbc.com Com for consultation!
