Zhongke Jufeng automatic loading mixer is a small-scale construction concrete mixer that integrates automatic loading, mixing, transportation and automatic unloading. It consists of high-power diesel engine, hydraulic converter, front and rear four-wheel drive axle, feeding device, feeding hopper, unloading hopper, extended unloading hopper, frame, mixing tank, special planetary reducer for mixing, hydraulic system, electric control system, automatic water supply system, etc. The automatic feeding mixer has many advantages, which can greatly improve the production efficiency. Next, we will introduce the features of the automatic feed mixer in detail.
一、混凝土搅拌车的特点
1、 Features of automatic loading mixer
1. 行走系统由发动机通过液力变矩器、前传动轴和后传动轴、前桥和后桥来操作。液压方向盘驱动，大大减小转弯半径，更适合现场作业，特别是小空间施工。采用液力变矩器，减少了对发动机的冲击，延长了发动机的使用寿命。采用无级变速电子控制阀，控制方便。
1. The traveling system is operated by the engine through the hydraulic torque converter, front drive shaft and rear drive shaft, front axle and rear axle. Hydraulic steering wheel drive, greatly reduce the turning radius, more suitable for field operations, especially small space construction. The adoption of hydraulic torque converter reduces the impact on the engine and prolongs the service life of the engine. Stepless electronic control valve is adopted, which is easy to control.
2. 液压系统采用恒功率可变活塞泵，减少了发动机的功率损失。
2. Constant power variable piston pump is used in the hydraulic system to reduce the power loss of the engine.
3.搅拌槽的旋转由液压马达通过专用行星减速器驱动。行星减速机的输出轴可以以一定的角度摆动，以满足路面恶劣条件下搅拌槽的跳动。搅拌车的搅拌槽配有调速阀，可准确控制搅拌槽的搅拌速度。
3. The rotation of mixing tank is driven by hydraulic motor through special planetary reducer. The output shaft of the planetary reducer can swing at a certain angle to meet the beating of the mixing tank under the adverse conditions of the road. The mixing tank of the mixer is equipped with a speed regulating valve, which can accurately control the mixing speed of the mixing tank.
4、物料干燥上料，按设计比例由铲臂、动臂缸、斗斗后铲、电子称量、自动上料。加料料斗安装成一定角度，确保加料顺利进行。用于放电的放电槽可以旋转并通过锁定机构固定在适当的位置。用于加长出料罐长度的加长出料罐可折叠放置于其固定位置，并通过挂钩固定于出料罐上。
4. Materials are dried and loaded by shovel arm, boom cylinder, bucket back shovel, electronic weighing and automatic loading according to the designed proportion. The feeding hopper is installed at a certain angle to ensure the smooth feeding. The discharge cell for discharging can be rotated and fixed in a proper position by a locking mechanism. The extended discharging tank for lengthening the length of the discharging tank can be folded and placed in its fixed position, and fixed on the discharging tank through a hook.
5. 进水系统配有定量自吸泵，并设有定量控制器自动定量进水。
5. The water inlet system is equipped with quantitative self-priming pump and quantitative controller for automatic quantitative water inlet.
6. 搅拌罐固定在底座上三点支承，前端与固定在底座上的齿轮箱输出法兰相连接，可以改变倾斜角。搅拌槽由两个带有锥形轴承的滚子上的焊接轨道支撑。喂料、搅拌和出料都是通过压板系统来完成的。搅拌槽向前旋转，供料与混凝土搅拌;反向旋转，在螺旋桨叶片的推动下，从混凝土出口出来。
6. The mixing tank is fixed on the base with three supports, and the front end is connected with the output flange of the gearbox fixed on the base to change the inclination angle. The mixing tank is supported by welded rails on two rollers with tapered bearings. Feeding, mixing and discharging are all done by pressing plate system. The mixing tank rotates forward, feeds and mixes with the concrete; reversely rotates, under the impelling of the propeller blade, it comes out from the concrete outlet.
以上是中科聚峰混凝土搅拌车厂家为大家介绍的相关内容，想要了解更多产品信息，欢迎访问网站http://www.zkzdsljbc.com：The above is the relevant content introduced by the manufacturer of Zhongke Jufeng automatic loading mixer. For more product information, please visit the website: http://www.zkzdsljbc.com
