1. Bring water reducing agent with the car: water reducing agent is a kind of concrete additive that can reduce the amount of mixing water under the condition of maintaining the same slump of concrete. It can be carried with the car and adjust the concrete well.
2、回厂检查罐内水量：每次出车任务完成回到站内的时候，检查储水罐内的水量，让水罐中的水随时处于满罐的状态，以备不时之需。
2. Return to the factory to check the water quantity in the tank: check the water quantity in the water storage tank every time when you return to the station after the completion of the task, so that the water in the water tank is full at any time, in case of emergency.
3、离厂前检查混凝土质量：可能会因为原料的不同，每一盘混凝土质量都会有变化。
3. Check the quality of concrete before leaving the factory: the quality of each plate of concrete may change due to different raw materials.
4、减少车辆行驶时间：混凝土运距一般在直径30千米范围以内，出车之前规划好路线以及车辆通行情况。
4. Reduce vehicle travel time: the concrete transportation distance is generally within the range of 30 km in diameter, and the route and vehicle traffic conditions should be planned before driving.
5、减少损失先卸料：如果遇到人为因素或者不可抗因素，导致长时间无法卸料的情况，一旦发现混凝土开始凝结，在报备负搅拌责自动上料搅拌车防止粘罐的方法人之后立刻进行卸料，以防整个罐体报废。卸料前让搅拌罐全速运转一两分钟。让混凝土充分搅拌，必要时可以加一些水，让混凝土搅拌得更均匀，也方便卸料。卸料不要大意和放料工打好关系。放料时尽量自己看着，免得放料工乱操作放料操作杆，每次罐子正反转中间位子时尽量停一下，保护减速机，托轮等。与放料工打好关系，卸料时也不要睡的太熟，万一工人闹情绪，把你车子放到工地不转罐子，造成闷罐就麻烦了。
5. To reduce the loss, discharge first: in case of failure to discharge for a long time due to human factors or irresistible factors, once it is found that the concrete begins to set, discharge immediately after reporting the method of automatic feeding mixer with responsibility for mixing to prevent sticking to the tank, so as to prevent the whole tank from being scrapped. Let the mixing tank run at full speed for one or two minutes before discharging. Let the concrete mix fully. If necessary, add some water to make the concrete mix more evenly and discharge easily. Don't be careless in discharging and have a good relationship with the discharger. When discharging, try to watch by yourself, so as to avoid the disorderly operation of the discharging lever by the discharging worker. Every time when the can is in the middle position, try to stop as much as possible to protect the reducer, supporting wheel, etc. Have a good relationship with the discharging worker, and don't sleep too well when discharging. In case the worker is in a mood and puts your car on the construction site without turning the can, it will be troublesome if the can is stuffy.
6、搅拌罐一定要仔细地冲洗干净。洗罐子时一定要仔细的冲洗干净，并把水反复的正反转两次，再放出来，然后一趟时把水箱的水全部放进罐子，再回到站加水清洗罐子。
6. The mixing tank must be washed carefully. When you wash the pot, you must wash it carefully, and put the water back and forth for two times, then put all the water in the tank into the pot, and then go back to the station to add water to clean the pot.
以上是驾驶自动上料搅拌车一定要做的事情，而且细节问题要做好。
The above is driving automatic feeding mixer must do things, and details to do.
以上的精彩内容均有混凝土搅拌车为您提供，更多的精彩内容请查看我们的网站：http://www.zkzdsljbc.com，我们后续会有更多的精彩内容为您呈现。
All the above wonderful contents are provided by concrete mixer. For more wonderful contents, please check our website: http://www.zkzdsljbc.com We will have more wonderful content for you in the future.
