您好,欢迎光临莱州聚峰机械有限公司网站!

服务热线

400-879-1999

你所在位置: 首页 >> 新闻资讯 > 行业资讯
行业资讯

自动铲料搅拌车日常需要怎样维护?

来源:http://www.zkzdsljbc.com/ 时间:2020-11-11

自动铲料搅拌车设备的温度由于在使用和使用过程中长期不间断运行而自然升高,但是如果温度超过设备本身可以承受的温度,则设备将受到损坏。因此,如果设备温度过高,则需要进行相应的维护工作,因此让我们一起看一下。
The temperature of the automatic shovel mixer increases naturally due to the long-term uninterrupted operation in the process of use and use. However, if the temperature exceeds the temperature that the equipment can bear, the equipment will be damaged. Therefore, if the equipment temperature is too high, corresponding maintenance work is required, so let's have a look.
1.防止发动机过热:由于环境温度较高,因此发动机容易过热。加强对发动机冷却系统的检查和维护,包括检查水箱,恒温器,水泵,风扇等零件,并注入冷却水以观察是否及时增加。当水温超过100°C时,请在凉爽的地方停下来冷却,以怠速运转发动机,然后打开引擎盖进行散热。
1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. Strengthen the inspection and maintenance of engine cooling system, including inspection of water tank, thermostat, water pump, fan and other parts, and inject cooling water to observe whether it is added in time. When the water temperature exceeds 100 ° C, please stop in a cool place to cool down, run the engine at idle speed, and then open the engine cover for heat dissipation.
2.防止发动机爆炸:夏天很热,有时可能会超过35°C,但是在这个季节中,零件过时的汽车发生自然爆炸的可能性更高。好了
2. Prevent engine explosion: it is very hot in summer, sometimes it may exceed 35 ° C, but in this season, cars with outdated parts are more likely to have natural explosion. okay
3.防止损坏汽车漆:当暴露在强烈的阳光下时,汽车漆会老化并起皱。普通的美容蜡具有防晒作用,但是所有汽车蜡均包含硅。因此,它会持续很长时间。紫外线腐蚀涂料,留下黑点。车蜡本身没有硬度或紫外线保护作用,但一旦变热便会消失,因此请尽可能将其停放在凉爽的地方。
混凝土搅拌车
3. Prevent damage to car paint: when exposed to strong sunlight, automotive paint will age and wrinkle. Common beauty waxes have sunscreen effects, but all car waxes contain silicon. As a result, it will last a long time. Ultraviolet light corrodes the paint, leaving black spots. The wax itself has no hardness or UV protection, but it will disappear once it gets hot, so please park it in a cool place as much as possible.
4.防止轮胎破裂:温度高,容易破裂,如果温度过高,轮胎会变形,拉伸强度容易降低。于轮胎本身,如果在非标准气压,轮胎老化,性能下降或驾驶过程中行驶时,汽车在硬质金属或其他硬物上滚动,汽车会突然爆裂。
4. Prevent tire from cracking: high temperature, easy to crack, if the temperature is too high, the tire will deform and the tensile strength is easy to reduce. As for the tire itself, if the car rolls on hard metal or other hard objects under non-standard pressure, tire aging, performance degradation or driving, the car will burst suddenly.
5.防止发动机润滑失效:在高温下,发动机油的粘度降低,抗氧化性降低,导致润滑不良。因此,应经常检查机油的数量和质量,并及时添加或更换。注意及时清洁机油滤清器和散热器,确保机油没有被堵塞并且热量散发良好,并避免了发动机过载。
5. Prevent engine lubrication failure: under high temperature, the viscosity of engine oil decreases and the oxidation resistance decreases, resulting in poor lubrication. Therefore, the quantity and quality of engine oil should be checked frequently and added or replaced in time. Pay attention to clean the oil filter and radiator in time to ensure that the oil is not blocked and the heat is well distributed, and avoid engine overload.
6.防止制动器故障:在高温环境下,制动液会蒸发并容易蒸发,从而在制动管路中产生空气阻力。此外,制动蹄很容易磨损,导致制动故障。因此,应经常检查和调整制动系统,并注意在长的斜坡上停车和干燥制动器,以确保良好的制动性能。如果制动轮毂很热,请停止并冷却,但不要倒入冷水以防止损坏制动轮毂。
6. Prevent brake failure: in high temperature environment, the brake fluid will evaporate and easily evaporate, which will produce air resistance in the brake pipeline. In addition, the brake shoes are easy to wear, resulting in brake failure. Therefore, it is necessary to check and adjust the brake system frequently, and pay attention to parking and drying the brake on long slopes to ensure good braking performance. If the brake hub is hot, stop and cool, but do not pour in cold water to prevent damage to the brake hub.
上一篇:混泥土搅拌车应该注意哪些事项?
下一篇:大型混凝土搅拌机油箱气孔有哪些作用?
tag:混凝土搅拌车,小型混凝土搅拌车,全自动混凝土搅拌车
当前位置: 首页 - 新闻资讯 > 行业资讯

自动铲料搅拌车日常需要怎样维护?

作者:中科聚峰混凝土搅拌车厂家 时间:2020-11-11

自动铲料搅拌车设备的温度由于在使用和使用过程中长期不间断运行而自然升高,但是如果温度超过设备本身可以承受的温度,则设备将受到损坏。因此,如果设备温度过高,则需要进行相应的维护工作,因此让我们一起看一下。
The temperature of the automatic shovel mixer increases naturally due to the long-term uninterrupted operation in the process of use and use. However, if the temperature exceeds the temperature that the equipment can bear, the equipment will be damaged. Therefore, if the equipment temperature is too high, corresponding maintenance work is required, so let's have a look.
1.防止发动机过热:由于环境温度较高,因此发动机容易过热。加强对发动机冷却系统的检查和维护,包括检查水箱,恒温器,水泵,风扇等零件,并注入冷却水以观察是否及时增加。当水温超过100°C时,请在凉爽的地方停下来冷却,以怠速运转发动机,然后打开引擎盖进行散热。
1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. Strengthen the inspection and maintenance of engine cooling system, including inspection of water tank, thermostat, water pump, fan and other parts, and inject cooling water to observe whether it is added in time. When the water temperature exceeds 100 ° C, please stop in a cool place to cool down, run the engine at idle speed, and then open the engine cover for heat dissipation.
2.防止发动机爆炸:夏天很热,有时可能会超过35°C,但是在这个季节中,零件过时的汽车发生自然爆炸的可能性更高。好了
2. Prevent engine explosion: it is very hot in summer, sometimes it may exceed 35 ° C, but in this season, cars with outdated parts are more likely to have natural explosion. okay
3.防止损坏汽车漆:当暴露在强烈的阳光下时,汽车漆会老化并起皱。普通的美容蜡具有防晒作用,但是所有汽车蜡均包含硅。因此,它会持续很长时间。紫外线腐蚀涂料,留下黑点。车蜡本身没有硬度或紫外线保护作用,但一旦变热便会消失,因此请尽可能将其停放在凉爽的地方。
混凝土搅拌车
3. Prevent damage to car paint: when exposed to strong sunlight, automotive paint will age and wrinkle. Common beauty waxes have sunscreen effects, but all car waxes contain silicon. As a result, it will last a long time. Ultraviolet light corrodes the paint, leaving black spots. The wax itself has no hardness or UV protection, but it will disappear once it gets hot, so please park it in a cool place as much as possible.
4.防止轮胎破裂:温度高,容易破裂,如果温度过高,轮胎会变形,拉伸强度容易降低。于轮胎本身,如果在非标准气压,轮胎老化,性能下降或驾驶过程中行驶时,汽车在硬质金属或其他硬物上滚动,汽车会突然爆裂。
4. Prevent tire from cracking: high temperature, easy to crack, if the temperature is too high, the tire will deform and the tensile strength is easy to reduce. As for the tire itself, if the car rolls on hard metal or other hard objects under non-standard pressure, tire aging, performance degradation or driving, the car will burst suddenly.
5.防止发动机润滑失效:在高温下,发动机油的粘度降低,抗氧化性降低,导致润滑不良。因此,应经常检查机油的数量和质量,并及时添加或更换。注意及时清洁机油滤清器和散热器,确保机油没有被堵塞并且热量散发良好,并避免了发动机过载。
5. Prevent engine lubrication failure: under high temperature, the viscosity of engine oil decreases and the oxidation resistance decreases, resulting in poor lubrication. Therefore, the quantity and quality of engine oil should be checked frequently and added or replaced in time. Pay attention to clean the oil filter and radiator in time to ensure that the oil is not blocked and the heat is well distributed, and avoid engine overload.
6.防止制动器故障:在高温环境下,制动液会蒸发并容易蒸发,从而在制动管路中产生空气阻力。此外,制动蹄很容易磨损,导致制动故障。因此,应经常检查和调整制动系统,并注意在长的斜坡上停车和干燥制动器,以确保良好的制动性能。如果制动轮毂很热,请停止并冷却,但不要倒入冷水以防止损坏制动轮毂。
6. Prevent brake failure: in high temperature environment, the brake fluid will evaporate and easily evaporate, which will produce air resistance in the brake pipeline. In addition, the brake shoes are easy to wear, resulting in brake failure. Therefore, it is necessary to check and adjust the brake system frequently, and pay attention to parking and drying the brake on long slopes to ensure good braking performance. If the brake hub is hot, stop and cool, but do not pour in cold water to prevent damage to the brake hub.

截屏,微信识别二维码