When operating and using the full-automatic concrete mixer truck, the temperature will naturally rise due to long-term uninterrupted operation, but if the temperature exceeds the temperature that the equipment itself can withstand, the equipment will be damaged to a certain extent. Therefore, if the temperature of the equipment is too high, we must work together.
1.防止发动机过热：由于环境温度较高，发动机容易过热，因此有必要加强对发动机冷却系统的检查和维护，例如检查水箱，恒温器，和水泵。注意风扇和其他组件，并及时添加它们。装满冷却水。当水温超过100°C时，请在凉爽的地方停下来冷却，以怠速运转发动机，然后打开引擎盖进行散热。
1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat, so it is necessary to strengthen the inspection and maintenance of the engine cooling system, such as checking the water tank, thermostat and water pump. Pay attention to fans and other components and add them in time. Fill with cooling water. When the water temperature exceeds 100 ° C, please stop in a cool place to cool down, run the engine at idle speed, and then open the hood to dissipate heat.
2.防止发动机爆炸：夏天很热，温度可能超过35°C。在这个季节中，零件破旧的汽车更容易发生自然爆炸。因此，准备好。
2. Prevent engine explosion: it is very hot in summer and the temperature may exceed 35 ° C. In this season, cars with worn-out parts are more likely to explode naturally. So get ready.
3.防止损坏汽车漆：当暴露在强烈的阳光下，汽车漆会老化和起皱。普通的美容蜡具有一定的防晒效果，而汽车蜡则含有硅酮，因此使用寿命更长。紫外线腐蚀涂料，留下黑点。车蜡本身不具有硬度或防紫外线功能，但由于高温会很快丢失，因此请尽可能将其停放在凉爽的地方。
3. Prevent damage to the car paint: when exposed to strong sunlight, the car paint will age and wrinkle. Ordinary beauty wax has a certain sunscreen effect, while automobile wax contains silicone, so it has a longer service life. Ultraviolet light corrodes the paint, leaving black spots. The car wax itself has no hardness or UV protection function, but it will be lost quickly due to high temperature, so please park it in a cool place as far as possible.
4.防止轮胎破裂：由于高温容易破裂。如果温度过高，则轮胎容易变形，抗拉强度降低。轮胎自身由于异常气压，轮胎的老化劣化，性能的劣化以及行驶中的轮胎在诸如硬质金属的坚硬物体上滚动而突然爆裂。
4. Prevent tire cracking: it is easy to crack due to high temperature. If the temperature is too high, the tire is easy to deform and the tensile strength is reduced. The tire itself suddenly bursts due to abnormal air pressure, aging and deterioration of the tire, deterioration of performance and rolling of the running tire on a hard object such as hard metal.
5.防止发动机润滑故障。高温会降低油的粘度，降低其抗氧化性，并导致润滑不良。因此，应经常检查机油的数量和质量，并及时添加或更换。应及时清洁机油滤清器和散热器，以确保机油不被堵塞，热量散发良好以及发动机过载。
5. Prevent engine lubrication failure. High temperature will reduce the viscosity of oil, reduce its oxidation resistance, and lead to poor lubrication. Therefore, the quantity and quality of engine oil should be checked frequently and added or replaced in time. The oil filter and radiator should be cleaned in time to ensure that the oil is not blocked, the heat dissipation is good and the engine is overloaded.
6.防止制动器故障：在高温环境下，制动液会蒸发并趋于蒸发，从而在制动管路中形成空气阻力。制动蹄也容易烧蚀，从而导致制动故障。因此，应经常检查和调整制动系统，并注意在较长的斜坡上停放和干燥制动器，以确保良好的制动性能。如果制动轮毂很热，则需要停止冷却，但请勿倒入冷水以防止制动轮毂破裂。
6. Prevent brake failure: in high temperature environment, the brake fluid will evaporate and tend to evaporate, thus forming air resistance in the brake pipeline. Brake shoes are also easy to be ablated, resulting in brake failure. Therefore, check and adjust the braking system frequently, and pay attention to parking and drying the brake on a long slope to ensure good braking performance. If the brake hub is very hot, stop cooling, but do not pour cold water to prevent the brake hub from cracking.
